Schluter RONDEC Finishing / Edge Protection Profiles - Stainless Steel

You are viewing the Stainless steel version of the profile. Other materials are available:

• Stainless steel
• Solid Brass
• Aluminum
• PVC

Application and Function

Schluter-RONDEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge.

The profile is available in stainless steel, solid brass, chrome-plated solid brass, color-coated aluminum, anodized aluminum, Tuscan color-coated aluminum and PVC. Schluter-RONDEC's wide range of materials, colors, and surface finishes allows for color coordination with tile and grout and the creation of interesting accents in decorative designs.

In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. Schluter-RONDEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or transition profile.

In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.

Note: Schluter-RONDEC, in stainless steel, does not feature the integrated joint spacer. Matching inside and outside corners, including sink corners, and connectors are available.

Available Sizes and Materials

Click to view images of available finishes.

Note: Certain accessories aren't available for certain sizes and finishes.

Installation

1. Select Schluter-RONDEC according to tile thickness.
2. Using a notched trowel, apply thin-set mortar to the area where profile is to be placed. If Schluter-RONDEC is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.
3. Press the perforated anchoring leg of profile into the mortar and align.
4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32 (1 mm) lower.
6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel profiles, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm).
7. Fill the joint completely with grout or setting material.
8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminum surfaces.

Material

Schluter-RONDEC is available in solid brass, chrome-plated brass, anodized aluminum, color-coated aluminum, stainless steel, and PVC.

Schluter-RONDEC, in stainless steel, is roll-formed using 304 (1.4301 = V2A) or 316 L (1.4404 = V4A) stainless steel. Therefore, the profiles contour differs slightly from those made of extruded brass, aluminum, or PVC. The profile is particularly well suited for applications requiring resistance against chemical exposure and high mechanical stresses. Applications include the food industry, breweries, dairies, commercial kitchens, public swimming pools, and hospitals. 316 L stainless steel offers even higher corrosion resistance when compared to the 304 stainless steel.

Maintenance

Schluter-RONDEC requires no special maintenance or care and is resistant to mold and fungi. Clean the profile using common household cleaning agents.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Stainless steel surfaces develop a sheen when treated with a chrome polishing agent.